MITCH DRYBOND SP

Cementitious, Polymer Modified Super Tile Adhesive

MITCH DRYBOND SP a single component cementitious powder containing performance enhancing polymers, silica and lot of other additives. It’s ready to use only requires addition of water on site. MITCHDRY BOND SP is perfect for fixing ceramic tiles, quarry tiles and similar materials for both internal and external applications. It provides strong adhesion to cement/sand screeds, to in-situ/pre-cast, concrete and brickwork. It is ideal for fixing at permanently wet areas. The enriched formula is perfect for fixing materials such as marble, stone cladding and brick slips. If the weight of is exceeding 45kg/m2 use mechanical fixing as well.

MITCH DRYBOND SP is the excellent choice for swimming pools and may be used with confidence in all wet process applications.

• MITCH DRYBOND SP can be used for tile on tile applications.
• MITCH DRYBOND SP can be used for new tiling at external walls, floor and roof.
• MITCH DRYBOND SP can be used for new tiling with ceramics and decorative cladding.
• MITCH DRYBOND SP can be used for new tiling at showers & wet processing areas, laboratories, hospitals, canteens, tiling corridors, pavements etc.
• MITCH DRYBOND SP can be used for granite on horizontal & limited vertical applications as well.

• Thin & Thick Bed Tiling: suitable for both applications
• Easy to Use: Just add water on site
• Pre-packed: Consistent Quality
• Dry Bonding: No need to moist the substrate and neither pre – soaking tiles required
• Waterproof: Excellent product for wet areas. Will not lose adhesion due to watertight barrier.
• Slow Setting: Long pot life and slow setting time (Initial Setting @ 6 hours , Final Setting @ 7 hours)
• Tile Adjusting Limit: Tiles can be adjusted till 30 minutes after application
• High Adhesive Bond Strength: Very good bond strength which make it suitable for larger tiles as well.
• Non Slip: Excellent grab properties which make it suitable for external vertical applications.