Waterproofing is an essential aspect of construction that ensures the longevity and durability of buildings by preventing water infiltration and damage. Mitchel Construction Chemicals provides top-notch waterproofing services, offering a range of high-quality products designed to meet various waterproofing needs.
Here’s an overview of our comprehensive product range:
MitchFlex 2K is a two-component cementitious flexible coating for concrete and masonry structures such as roofs and walls. MitchFlex 2K provides a seamless, tough and highly flexible film ensuring complete water protection. MitchFlex 2K is UV resistant therefore it is unaffected by sunrays and other weather elements. This in addition to MitchFlex 2Ks excellent bond strength ensures that the film does not disintegrate or peel off over time.
FERROSEAL is a metallic waterproofing compound designed for all concrete and masonry structures, below and above grade. It contains special oxidizing and activating agents that, in the presence of moisture, react both physically and chemically with the substrate providing a barrier against water penetration. FERROSEAL is equally effective in waterproofing new or old structures and once properly applied becomes a part of the under lying surface thereby providing longevity and protection to the structure.
Mitchell’s Hardoflex is an acrylic based elastomeric coating for concrete and metal structures such as roofs and walls. Hardoflex provides a seamless, tough and highly flexible film ensuring complete water protection. Hardoflex is UV resistant therefore it is unaffected by sun rays and other weather elements. This in addition to Hardoflex’s excellent bond strength ensures that the film does not disintegrate or peel off over time.
Hardoflex SR is a solar reflective elastomeric coating for concrete and metal structures such as roofs and walls. It is an acrylic based elastomeric coating and the waterproofing and adhesive properties of the acrylic base material have been complemented by the addition of hollow ceramic spheres that prevent the passage of solar heat.
MitchSeal is a clear, slightly viscous siloxane based liquid suitable for spray or brush application to concrete and masomy surfaces. It penetrates and seals the pores, voids and capillaries to form a barrier against the penetration of chemicals, oils, grease and water. MitchSeal can also be effectively employed to seal other building elements such as stones, cement blocks and non-glazed tiles. The original colour and texture of the substrate is retained after the application of MitchSeal and is not further affected by weather or UV rays.
MitchSeal CWP is a cementitious capillary waterproofing system, which provides a permanent solution to leakage, seepage or ingress of water in concrete by sealing capillaries and shrinkage cracks in both positive and negative side of the structure. MitchSeal CWP penetrates into pores of substrate by capillary action and is carried deep into concrete by inherent moisture therein. MitchSeal CWP is activated by moisture and reacts with free lime present in cement matrix and creates a continuous barrier of insoluble crystals. The capillaries are permanently blocked to the passage of water. Rate and penetration of crystals depends on presence of moisture, free lime and density of concrete.
HardoPlug is an ultra rapid hardening agent, in powder form, for cement. When mixed with fresh cement, it causes rapid setting within 1 to 2 minutes and is therefore ideally suited for plugging and stopping infiltration of water through concrete or brickwork.
HardoRapid is a quick setting hydraulic cement which instantly stops gushing water or seepage through concrete or masonry structures. When mixed with fresh water, it causes rapid setting within 1 to 2 minutes and is therefore ideally suited for plugging and stopping infiltration of water through concrete or brickwork. The setting time will depend on the site conditions, weather and temperature of mixing water, higher temperatures will accelerate the setting while some retardation may occur at lower temperatures.
MITUSHIELD is a polymer modified elastic bitumen coating for concrete and metal structures such as roofs and walls. Mitushield provides a seamless, tough and flexible film ensuring complete water protection.
MITCHFLEX 1 K is a single component cementitious flexible coating for concrete and masonry structures such as roofs and walls. Mitchflex 1K provides a seamless, tough and highly flexible film ensuring complete water protection. Mitchflex 1 K is UV resistant therefore it is unaffected by sun rays and other weather elements. This in addition to Mitchflex 1K’s excellent bond strength ensures that the film does not disintegrate or peel off over time.
Mitchpruf PU is a one component polyurethane based moisture curing elastomeric waterproofing coating for concrete and metal structures such as roofs and walls. Mitchpruf PU provides a seamless, tough and highly flexible film ensuring complete and long term water protection.
MITCHPRUF M319 is a two component acrylic polymer modified cementitious coating. It is supplied in a prepackaged form. This product is designed to be mixed easily on site using a slow speed drill fitted with a mixing paddle and then applied to the substrate using a brush, roller, trowel or spray.
MITCHBAR 1020 is in the form of rubber strips and is made of high performance modified polymer materials. The swelling action is the result of the contact between water and hydrophilic groups which are part of the MITCHBAR 1020 molecular structure. Expansion of the water stop creates a positive seal against the face of the concrete joint and prevents the entry of water into the structure through the protected joint. It has controlled expansion rate to prevent damage to freshly placed concrete. It retains original shape even after repeated expansion and contraction. The swelling properties are unaffected by long term wet/dry cycling and provides an effective water seal throughout the life of the structure.
Why Choose Mitchel Construction Chemicals?
At Mitchel Construction Chemicals, we understand the importance of effective waterproofing in maintaining the integrity of buildings and structures. Our products are formulated with advanced technology to provide the highest level of protection against water damage. By choosing our waterproofing solutions, you benefit from:
Durability: Our products are designed to offer long-lasting protection, ensuring the longevity of your structures.
Versatility: We offer a wide range of products to meet various waterproofing needs and applications.
Quality: Our commitment to quality ensures that all our products meet the highest industry standards.
Expertise: With years of experience in the construction industry, we provide reliable and effective waterproofing solutions.
Protect your structures from water damage with Mitchel Construction Chemicals’ superior waterproofing products. Contact us today to learn more about our waterproofing solutions and how we can help safeguard your investments.