MITCHSEAL

Water Repellent

DESCRIPTION

Mitchell’s MitchSeal is a clear, slightly viscous siloxane based liquid suitable for spray or brush application to concrete and masomy surfaces. It penetrates and seals the pores, voids and capillaries to form a barrier against the penetration of chemicals, oils, grease and water. MitchSeal can also be effectively employed to seal other building elements such as stones, cement blocks and non-glazed tiles. The original colour and texture of the substrate is retained after the application of MitchSeal and is not further affected by weather or UV rays.

USE

  • Concrete Floors
  • Clean Labs
  • Masonry Blocks
  • Decorative Bricks

ADVANTAGES

  • Positive Sealing
  • Weatherproof
  • Easy to clean
  • Hygienic
  • Masonry Bricks
  • Face Tiles
  • Terrazzo Surfaces
  • Natural Stone
  • Economical
  • Dustproof
  • Chemical resistant
  • Easy application

APPLICATION GUIDELINES

Surfaces should be clean, sound and free of dirt, dust, oil, grease, laitance, curing membranes and other foreign matter.
Mitchseal is applied in two to three coats and the application can be carried out with a mechanical spray, brush, squeegee or rubber wiper. For ontimal effectiveness. on horizontal surfaces. MitchSeal may be poured onto the surface from a plastic can and then worked back and forth using a long handled wiper or squeegee.

Application should be even with no under or over saturated areas, puddles should be avoided. The surface should be allowed to dry before the application of each coat.

PACKAGING

5 & 30 Liter Cans

TECHNICAL ASSISTANCE

For further details and assistance for specific application requirements and for other product information please contcat Mitchell at the addresses given below.